Experimental study on the shear behavior of the interface between cushion materials and the concrete raft     

Yaokun Li  Xiaolei Han  Khaled Galal  Jing Ji 《地震工程与工程振动(英文版)》2018,17(1):165-178

Cushion is a layer of granular materials between the raft and the ground. The shear behavior of the interface between the cushion and the raft may influence the seismic performance of the superstructure. In order to quantify such influences, horizontal shear tests on the interfaces between different cushion materials and concrete raft under monotonic and cyclic loading were carried out. The vertical pressure P_v, material type and cushion thickness h_c were taken as variables. Conclusions include: 1) under monotonic loading, P_v is the most significant factor; the shear resistance P_(hmax) increases as P_v increases, but the normalized factor of resistance μ_n has an opposite tendency; 2) for the materials used in this study, μ_n varies from 0.40 to 0.70, the interface friction angle δ_s varies from 20° to 35°, while u_(max) varies from 3 mm to 15 mm; 3) under cyclic loading, the interface behavior can be abstracted as a "three-segment" back-bone curve, the main parameters include μ_n, the displacement u_1 and stiffness K_1 of the elastic stage, the displacement u_2 and stiffness K_2 of the plastic stage; 4) by observation and statistical analysis, the significance of different factors, together with values of K_1, K_2 and μ_n have been obtained.  相似文献   

Analytical investigation of bidirectional ductile diaphragms in multi-span bridges     

Xiaone Wei  Michel Bruneau 《地震工程与工程振动(英文版)》2018,17(2):235-250

In the AASHTO Guide Specifications for Seismic Bridge Design Provisions,ductile diaphragms are identified as Permissible Earthquake-Resisting Elements(EREs),designed to help resist seismic loads applied in the transverse direction of bridges.When adding longitudinal ductile diaphragms,a bidirectional ductile diaphragm system is created that can address seismic excitations acting along both the bridge’s longitudinal and transverse axes.This paper investigates bidirectional ductile diaphragms with Buckling Restrained Braces(BRBs)in straight multi-span bridge with simply supported floating spans.The flexibility of the substructures in the transverse and longitudinal direction of the bridge is considered.Design procedures for the bidirectional ductile diaphragms are first proposed.An analytical model of the example bridge with bidirectional ductile diaphragms,designed based on the proposed methodology,is then built in SAP2000.Pushover and nonlinear time history analyses are performed on the bridge model,and corresponding results are presented.The effect of changing the longitudinal stiffness of the bidirectional ductile diaphragms in the end spans connecting to the abutment is also investigated,in order to better understand the impact on the bridge’s dynamic performance.  相似文献   

Deterministic and fuzzy-based methods to evaluate community resilience     

Omar Kammouh  Ali Zamani Noori  Veronica Taurino  Stephen A. Mahin  Gian Paolo Cimellaro 《地震工程与工程振动(英文版)》2018,17(2):261-275

  相似文献   

Behavior of braced excavation in sand under a seismic condition: experimental and numerical studies   总被引：1，自引：1，他引：0  

Sanku Konai  Aniruddha Sengupta  Kousik Deb 《地震工程与工程振动(英文版)》2018,17(2):311-324

The behavior of braced excavation in dry sand under a seismic condition is investigated in this paper. A series of shake table tests on a reduced scale model of a retaining wall with one level of bracing were conducted to study the effect of different design parameters such as excavation depth, acceleration amplitude and wall stiffness. Numerical analyses using FLAC 2D were also performed considering one level of bracing. The strut forces, lateral displacements and bending moments in the wall at the end of earthquake motion were compared with experimental results. The study showed that in a post-seismic condition, when other factors were constant, lateral displacement, bending moment, strut forces and maximum ground surface displacement increased with excavation depth and the amplitude of base acceleration. The study also showed that as wall stiffness decreased, the lateral displacement of the wall and ground surface displacement increased, but the bending moment of the wall and strut forces decreased. The net earth pressure behind the walls was influenced by excavation depth and the peak acceleration amplitude, but did not change significantly with wall stiffness. Strut force was the least affected parameter when compared with others under a seismic condition.  相似文献   

Structural strength deterioration of coastal bridge piers considering non-uniform corrosion in marine environments     

Anxin Guo  Wenting Yuan  Haitao Li  Hui Li 《地震工程与工程振动(英文版)》2018,17(2):429-444

In the aggressive marine environment over a long-term service period,coastal bridges inevitably sustain corrosion-induced damage due to high sea salt and humidity.This paper investigates the strength reduction of coastal bridges,especially focusing on the effects of non-uniform corrosion along the height of bridge piers.First,the corrosion initiation time and the degradation of reinforcement and concrete are analyzed for bridge piers in marine environments.To investigate the various damage modes of the concrete cover,a discretization method with fiber cells is used for calculating time-dependent interaction diagrams of cross-sections of the bridge piers at the atmospheric zone and the splash and tidal zone under a combination of axial force and bending moment.Second,the shear strength of these aging structures is analyzed.Numerical simulation indicates that the strength of a concrete pier experiences dramatic reduction from corrosion initiation to the spalling of the concrete cover.Strength loss in the splash and tidal zone is more significant than in the atmospheric zone when structures’service time is assumed to be the same.  相似文献   

Model tests on XCC-piled embankment under dynamic train load of high-speed railways     

Tingting Niu  Hanlong Liu  Xuanming Ding  Changjie Zheng 《地震工程与工程振动(英文版)》2018,17(3):581-594

Piled embankments, which offer many advantages, are increasingly popular in construction of high-speed railways in China. Although the performance of piled embankment under static loading is well-known, the behavior under the dynamic train load of a high-speed railway is not yet understood. In light of this, a heavily instrumented piled embankment model was set up, and a model test was carried out, in which a servo-hydraulic actuator outputting M-shaped waves was adopted to simulate the process of a running train. Earth pressure, settlement, strain in the geogrid and pile and excess pore water pressure were measured. The results show that the soil arching height under the dynamic train load of a high-speed railway is shorter than under static loading. The growth trend for accumulated settlement slowed down after long-term vibration although there was still a tendency for it to increase. Accumulated geogrid strain has an increasing tendency after long-term vibration. The closer the embankment edge, the greater the geogrid strain over the subsoil. Strains in the pile were smaller under dynamic train loads, and their distribution was different from that under static loading. At the same elevation, excess pore water pressure under the track slab was greater than that under the embankment shoulder.  相似文献   

Experimental and analytical study on design performance of full-scale viscoelastic dampers     

Shiang-Jung Wang  I-Chen Chiu  Chung-Han Yu  Kuo-Chun Chang 《地震工程与工程振动(英文版)》2018,17(4):693-706

Viscoelastic (VE) dampers, with their stiffness and energy dissipation capabilities, have been widely used in civil engineering for mitigating wind-induced vibration and seismic responses of structures, thus enhancing the comfort of residents and serviceability of equipment inside. In past relevant research, most analytical models for characterizing the mechanical behavior of VE dampers were verified by comparing their predictions with performance test results from small-scale specimens, which might not adequately or conservatively represent the actual behavior of full-scale dampers, especially with regard to the ambient temperature, temperature rise, and heat convection effects. Thus, in this study, by using a high-performance testing facility with a temperature control system, full-scale VE dampers were dynamically tested with different displacement amplitudes, excitation frequencies, and ambient temperatures. By comparing the analytical predictions with the experimental results, it is demonstrated that adopting the fractional derivative method together with considering the effects of excitation frequencies, ambient temperatures, temperature rises, softening, and hardening, can reproduce the design performance of full-scale VE dampers very well.  相似文献   

Velocity structure building and ground motion simulation of the 2014 Ludian <Emphasis Type="Italic">M</Emphasis>s 6.5 Earthquake     

Lei Zhang  Yanjie Xu  Jinting Wang  Chuhan Zhang 《地震工程与工程振动(英文版)》2018,17(4):719-727

This study constructs a 3D velocity structure model of the Ludian region in the Yunnan province, southwestern China, and simulates ground motion propagation of the 2014 Ludian Ms 6.5 earthquake. It aims to construct the local velocity structure of the Ludian region in three dimensions and with high precision. The simulation, using the spectral element method, is validated by field data from the Ludian earthquake records. Thus, it demonstrates that the adopted key parameters, such as the seismic source mechanism, propagation medium and geographical features of the engineering site, are appropriated for the simulation. Meanwhile, the simulation generates the ground motion distribution of the study region with an earthquakeinduced landslide in Ludian earthquake.  相似文献   

Shear strength of frozen clay under freezing-thawing cycles using triaxial tests     

Miao Wang  Shangjiu Meng  Yiqiang Sun  Haiqing Fu 《地震工程与工程振动(英文版)》2018,17(4):761-769

Using a new low-temperature dynamic triaxial apparatus, the influence law of freezing-thawing cycles on clay shear strength is studied. In this research, the concept of correction coefficients of freezing-thawing cycles on clay static strength, cohesion and internal friction angles is proposed, and the change patterns, correction curves and regressive formulae of clay static strength, cohesion and internal friction angles under freezing-thawing cycles are given. The test results indicate that with increasing numbers of freezing-thawing cycles, the clay static strength and cohesion decrease exponentially but the internal friction angle increases exponentially. The performance of static strength, cohesion and internal friction angles are different with increasing numbers of freezing-thawing cycles, i.e., the static strength decreases constantly until about 30% of the initial static strength prior to the freezing-thawing cycling and then stays basically stable. After 5–7 freezing-thawing cycles, the cohesion decreases gradually to about 70% of the initial cohesion. The internal friction angle increases about 20% after the first freezing-thawing cycle, then increases gradually close to a stable value which is an increase of about 40% of the internal friction angle. The freezing-thawing process can increase the variation of the density of the soil samples; therefore, strict density discreteness standards of frozen soil sample preparation should be established to ensure the reliability of the test results.  相似文献   

Optimal seismic retrofit model for steel moment resisting frames with brittle connections     

Hyo Seon Park  Se Woon Choi  Byung Kwan Oh 《地震工程与工程振动(英文版)》2018,17(4):835-847

Based on performance-based seismic engineering, this paper proposes an optimal seismic retrofit model for steel moment resisting frames (SMRFs) to generate a retrofit scheme at minimal cost. To satisfy the acceptance criteria for the Basic Safety Objective (BSO) specified in FEMA 356, the minimum number of upgraded connections and their locations in an SMRF with brittle connections are determined by evolutionary computation. The performance of the proposed optimal retrofitting model is evaluated on the basis of the energy dissipation capacities, peak roof drift ratios, and maximum interstory drift ratios of structures before and after retrofitting. In addition, a retrofit efficiency index, which is defined as the ratio of the increment in seismic performance to the required retrofitting cost, is proposed to examine the efficiencies of the retrofit schemes derived from the model. The optimal seismic retrofit model is applied to the SAC benchmark examples for threestory and nine-story SMRFs with brittle connections. Using the retrofit efficiency index proposed in this study, the optimal retrofit schemes obtained from the model are found to be efficient for both examples in terms of energy dissipation capacity, roof drift ratio, and maximum inter-story drift ratio.  相似文献